DTF TRANSFER APPLICATION INSTRUCTIONS
WHAT YOU NEED:
• Heat press
• DTF transfer
• Garment (cotton, polyester, or blend)
• Teflon sheet or parchment paper
⸻
???? Recommended Temperature by Fabric Type:
• Cotton and 50/50 blends: 300°F (150°C)
• Polyester or synthetic fabrics: 280°F–300°F (138°C–150°C)
⏱️ APPLICATION SETTINGS:
Steps
Suggested Temperature
Time
- Pre-press garment
280–300°F (138–150°C)
5 seconds - Main press
280–300°F (138–150°C)
10 seconds - Peel film – Cold Peel
Let it cool completely
— - Final press
280–300°F (138–150°C)
5 seconds
???? ADDITIONAL TIPS:
• Pre-press the area where the design will be applied to remove moisture and wrinkles.
• Only peel the film once it’s completely cold (cold peel) to avoid lifting or shifting.
• For a smooth finish, cover the design with a Teflon or parchment sheet during the final press.
• If using a home iron, do not iron directly over the transfer.
⚠️ DISCLAIMER:
The time, pressure, and temperature of customers’ heat presses may vary; these instructions are provided as a general guideline.